DencoHappel ZGF.1E series Operation Manual page 35

Flex-Geko Fan Coil Unit
Fig. 4-5: Sizes and mounting dimensions of the Flex-Geko with ceiling installation
PR-2011-0115-GB • Subject to modifications • R4-12/2015
Model size 1
Width w [mm] 410
Tab. 4-3: Air routing and mounting dimensions b
Keyholes are provided at the side of the rear panel for securing the units (2 for
each side, refer to ). Suitable screws for the intended mounting type are required.
With ceiling installation at least 4 drill holes are necessary (2 on each side).
• Transfer the drilling measurements on the wall as shown in Fig. 4-5 and
Tab. 4-3 on the ceiling.
• Insert screws/bolts.
• Hang up the Flex-Geko into the keyholes.
• Use a spirit level for precise vertical and horizontal alignment of the Flex-Geko
(refer to Fig. 4-5) and tighten the screws. (Pay attention to the pitch of cooling
units!)
* Space need for
field-provided piping on site
** only with frontal
air intake
2 3 4
560 710 860
Safety and User Instructions
5 6 7
1010 1160 1310
8
1460
35