Vlan Interface Context - HP MSM765zl Reference Manual

CLI commands

VLAN interface context

VLAN interface context
Path: View > Enable > Config > VLAN interface
Use this context to configure VLANs.
end
Supported on:
end
Switches to parent context.
ip address
Supported on:
ip address <ip address>/<mask>
Sets a static IP address for the VLAN.
Parameters
<address>
</mask>
ip address mode
Supported on:
ip address mode (dhcp | static | none)
Sets the IP addressing mode for this VLAN interface.
Parameters
dhcp
static
none
tagged
New
Supported on: E-MSM720
tagged <port>
Assigns the current VLAN to the specified port as tagged.
no tagged <port>
Removes the current VLAN from the specified port.
untagged
New
Supported on: E-MSM720
untagged <port>
Assigns the current VLAN to the specified port as untagged.
2-120
View > Enable > Config > Internet port interface > VLAN interface
View > Enable > Config > LAN port interface > VLAN interface
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
IP address.
Subnet mask in CIDR format. Specifies the number of bits in the mask.
MSM710 E-MSM720 MSM760 MSM765zl
Dynamic host configuration protocol. The DHCP server will automatically
assign an address to the controller, which functions as a DHCP client.
This option enables you to manually assign an IP address to the controller.
This VLAN does not have an IP address.