Mac-Filters - HP MSM765zl Reference Manual

CLI commands
Virtual AP context

mac-filters

Supported on:
mac-filters <address>
Adds an address to the MAC filter list.
no mac-filters <address>
Remove the specified address from the MAC filter list.
Parameters
<address>
Description
This feature enables you to control access to the controller based on the MAC address of client
stations. You can either block access or allow access, depending on your requirements. When
both this option and the MAC-based authentication options are enabled, the following applies: if a
user's MAC address does not appear in the MAC filtering list, then MAC-based authentication
takes place for that user.
mac-filters mode
Supported on:
mac-filters mode (allow | block)
Either allow or block access to the wireless network for client stations whose addresses appear in
the MAC filter list.
mac authentication accounting
Supported on:
mac authentication accounting
Enables RADIUS accounting for this VAP (VSC).
no mac authentication accounting
Disables RADIUS accounting for this VAP (VSC).
mac authentication accounting radius profile
Supported on:
mac authentication accounting radius profile <name>
Sets RADIUS accounting to use the specified RADIUS profile.
no mac authentication accounting radius profile
Disables accounting support for MAC authentication.
mac authentication radius profile
Supported on:
mac authentication radius profile <radiusname>
Specifies the name of the RADIUS profile to use for MAC-based authentication.
2-106
MSM710 E-MSM720 MSM760 MSM765zl
MAC address. Specify 6 pairs of hexadecimal numbers separated by
colons, with the values a to f in lowercase. For example: 00:00:00:0a:0f:01
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl