Radius Profiles Context - HP MSM765zl Reference Manual

CLI commands

RADIUS profiles context

RADIUS profiles context
Path: View > Enable > Config > RADIUS profiles
Use this context to define RADIUS profiles. These profiles are used to establish a connection with
RADIUS servers.
end
Supported on:
end
Switches to parent context.
radius-server accounting port
Supported on:
radius-server accounting port <number>
Specifies the port to use for RADIUS accounting.
Parameters
<number>
radius-server alternate hosts
Supported on:
radius-server alternate hosts
Try last answering RADIUS host first.
no radius-server alternate hosts
Try primary RADIUS host first.
radius-server authentication method
Supported on:
radius-server authentication method (mschap | chap | mschapv2 | pap | eap-md5)
Sets the authentication method to use when communicating with the RADIUS server.
For 802.1X users, the authentication method is always determined by the 802.1X client software
and is not controlled by this setting.
If traffic between the controller and the RADIUS server is not protected by a VPN, it is
recommended that you use either EAP-MD5 or MSCHAP V2, if supported by your RADIUS Server.
(PAP, MSCHAP V1 and CHAP are less secure protocols.)
radius-server authentication port
Supported on:
radius-server authentication port <number>
Specifies the port to use for RADIUS authentication. By default, RADIUS servers use port 1812.
Parameters
<number>
2-122
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
Accounting port number. Range: 1 - 65535.
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
Authentication port number. Range: 1 - 65535