Context Hierarchy - HP MSM765zl Reference Manual

Context hierarchy

CLI commands are grouped into functional contexts. The following table shows the context
hierarchy and the commands used to switch from the parent context:
Context hierarchy
View
Enable
Config
VLAN interface
WAN IP interface
LAN IP interface
Upstream/WAN port interface
VLAN interface
Downstream/LAN port interface
VLAN interface
Wireless interface
Local mesh profile
VLAN interface
PPTP client interface
GRE interface
Virtual AP
Subscription plan
MAC addresses list
Network profile
IPsec
DHCP server
Syslog
SNMP user
SNMP notification receiver
RADIUS profile
IP QOS
Access Controller
Default user session profile
Session profile
Public access RADIUS attributes
LLDP agent
User account
Keychain
Keys
Active Directory Group
Controlled APs
Controlled APs network configuration
To switch to this context from parent context
(This is the root context. No command is needed.)
enable
config
vlan <name>
interface ip wan
interface ip lan
interface ethernet port-2
interface vlan <id>[-<id2>]
interface ethernet port-1
interface vlan <id>[-<id2>]
interface wireless
local mesh profile
interface vlan <id>[-<id2>]
interface pptp client-default
interface gre <name>
virtual ap <name>
subscription plan <name>
mac list <name>
network-profile <name>
ipsec policy <name>
dhcp server lan
logging destination <name>
snmp-server user <name>
snmp-server notification receiver <host>
radius-server profile <name>
ip-qos profile <name>
access controller
session profile default
session profile <name>
remote configuration radius
lldp config <port>
user profile <name>
key chain <name>
key <number>
active-directory group <name>
controlled network (ap <name> [<mac>]
config
Context hierarchy
1-9