Wan Ip Interface Context - HP MSM765zl Reference Manual

WAN IP interface context

Path: View > Enable > Config > WAN IP interface
Use this context to configure various IP-networking related settings on the Internet port.
pppoe client user
Supported on:
pppoe client user <username> <password>
Sets the PPPoE username and password.
no pppoe client user
Deletes the PPPoE username.
Parameters
<username>
<password>
tagged
New
Supported on: E-MSM720
tagged <port>
Tags the current VLAN on the specified port.
no tagged <port>
Removes the current VLAN from the specified port.
untagged
New
Supported on: E-MSM720
untagged <port>
Untags the current VLAN on the specified port.
no untagged <port>
Removes the current VLAN from the specified port.
ip address mode
Supported on:
ip address mode (dhcp | pppoe | static | none)
Sets the IP addressing mode for Internet.
Parameters
dhcp
pppoe
MSM710 E-MSM720 MSM760 MSM765zl
The username assigned to you by your ISP. The controller will use this
username to log on to your ISP when establishing a PPPoE connection.
The password assigned to you by your ISP. The controller will use this
username to log on to your ISP when establishing a PPPoE connection.
MSM710 E-MSM720 MSM760 MSM765zl
Dynamic host configuration protocol. The DHCP server will automatically
assign an address to the controller, which functions as a DHCP client.
Point-to-point protocol over Ethernet. The PPPoE server will automatically
assign an IP address to the controller. You need to supply a username and
password so the controller can log on.
CLI commands
WAN IP interface context
2-93