Using The Boot Console Handler Interface - HP 9000 700 Series Owner's Manual

Board serial number.
SCSI device addresses and identi cations.
Console path con guration.
As some of the rmware in the boot console handler is also
Note
used with the Model 743
some device options such as HP Parallel not in the Model V743
VXI controller.

Using the Boot Console Handler Interface

To use the boot console handler menus, follow these steps:
1. Exit any applications you may have running.
2. Shut down your system.
o the power to the VXIbus mainframe for a few seconds. Then, turn
3. Turn
on .
the power back
4. Press at the following prompt:
4 ESC 5
System Search started ...
Press [ESC] to discontinue the Auto Boot process.
In a few seconds, this message appears:
Auto Boot aborted.
A short time later, the following menu appears:
==== MAIN MENU ===============================
Key Operation
--- -----------------------------------------
1 Boot From a Device
2 Path Configuration
3 Mode Configuration
4 Interactive Testing
5 Firmware Information
6 Hardware Information
7 System Configuration
... .........................................
77 Reset the system
88 Change Mode
99 Restart Auto Boot
----------------------------------------------
Press Key, then press [Enter/Return]
i , the I/O ASIC selections may list
Using the Boot Console Handler
B
B-3