Vlan Interface Context; Ip Address; Ip Address Mode - HP MSM7XX Reference Manual

VLAN interface context

Path: View > Enable > Config > Internet interface > VLAN interface
View > Enable > Config > LAN interface > VLAN interface
This context provides commands for configuring Virtual LANs (VLANs). In this context, VLANs
can be added or edited.
For example, to create a new VLAN interface named "hongkong" on the LAN port with VLAN id 88,
do the following:
CLI(config)# interface lan
CLI(if-lan)# interface vlan 88
CLI(if-vlan)# vlan name hongkong
CLI(if-vlan)# ip address mode dhcp
CLI(if-vlan)# no nat
CLI(if-vlan)# end
CLI(if-lan)#
end
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
end
Switches to parent context.

ip address

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ip address <ip address>/<mask>
Sets a static IP address for the VLAN.
Parameters
IP address.
<address>
Subnet mask in CIDR format. Specifies the number of bits in the mask.
</mask>

ip address mode

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ip address mode (dhcp | static | none)
Sets the IP addressing mode for this VLAN interface.
Parameters
Dynamic host configuration protocol. The DHCP server will automatically
dhcp
assign an address to the service controller, which functions as a DHCP
client.
This option enables you to manually assign an IP address to the service
static
controller.
This VLAN does not have an IP address.
none
CLI commands
2-105