Dhcp Relay Remote Id - HP MSM765zl Reference Manual

dhcp relay remote id

Supported on:
dhcp relay remote id <string>
Sets the DHCP relay Option 82 remote ID.
no dhcp relay remote id
Clears the DHCP relay Option 82 remote ID.
dhcp relay access centralized clients
Supported on:
dhcp relay access centralized clients
Listen for DHCP requests from access-controlled client stations using the client data tunnel.
no dhcp relay access centralized clients
Do not listen for DHCP requests from access-controlled client stations using the client data
tunnel.
dhcp relay access lan
Supported on:
dhcp relay access lan
Listen for DHCP request on the LAN port.
no dhcp relay access lan
Do not listen for DHCP request on the LAN port.
dhcp relay access access network
New
Supported on: E-MSM720
dhcp relay access access network
Listen for DHCP request on the Access network.
no dhcp relay access access network
Do not listen for DHCP request on the Access network.
dhcp relay extend internet port
Supported on:
dhcp relay extend internet port
Alter DHCP requests so they appear to originate from the Internet port.
no dhcp relay extend internet port
Do not alter DHCP requests.
When enabled, the controller will alter the DHCP address requests from client stations so that
they appear to originate from the network assigned to the Internet port on the controller. This will
cause the DHCP server to assign IP addresses on this network to all client stations. The controller
handles all mapping between the two subnets internally.
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 MSM760 MSM765zl
MSM710 MSM760 MSM765zl
CLI commands
Config context
2-21