Default User Session Profile Context - HP MSM765zl Reference Manual

Default user session profile context

Path: View > Enable > Config > Default user session profile
Use this context to define default settings for user sessions. Most of these attributes can be
overridden by adding settings to a user's RADIUS account.
In this context, all commands add an attribute to the list, in some cases (access-list & mac-
address) several entries are added. The "no" form will remove the attributes.
accounting interim update
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
accounting interim update <number>
Sets the default accounting interim update interval (in seconds) for all users that do not have a
specific interval set in their profile.
no accounting interim update
Removes this attribute.
idle timeout
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
idle timeout <number>
Sets the default idle time out for all users that do not have a specific limit set in their profile.
no idle timeout
Removes this attribute.
maximum input octets
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
maximum input octets <value>
Sets the maximum input limit in octets for all users that do not have a specific limit set in their
profile.
no maximum input octets
Removes this attribute.
maximum input packets
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
maximum input packets <number>
Sets the maximum input limit in packets for all users that do not have a specific limit set in their
profile.
no maximum input packets
Removes this attribute.
CLI commands
Default user session profile context
2-75