Ssid Name - HP MSM765zl Reference Manual

ssid name

Supported on: MSM710 E-MSM720 MSM760 MSM765zl
ssid name <name>
Specifies the WLAN name (SSID) for the profile.
encryption key 1
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
encryption key <key> <value>
Sets WEP key 1.
no encryption key <key>
Deletes WEP key 1.
Parameters
WEP key number. Range: 1 - 4. Keys 2 to 4 are only supported on the first
<key>
WLAN profile.
Key value. The number of characters you specify for a key determines the
<value>
level of encryption the controller will provide.
For 40-bit encryption, specify 5 ASCII characters or 10 HEX digits.
For 128-bit encryption, specify 13 ASCII characters or 26 HEX digits.
encryption key format
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
encryption key format (hex | ascii)
Specify the WEP key format.
Parameters
Hex keys should only include the following digits: 0-9, a-f, A-F
hex
ASCII keys are much weaker than carefully chosen hex keys. You can
ascii
include ASCII characters between 32 and 126, inclusive, in the key.
However, note that not all client stations support non-alphanumeric
characters such as spaces, punctuation, or special symbols in the key.
transmit key
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
transmit key <key number>
Sets the key the controller will use to encrypt transmitted data. All four keys are used to decrypt
received data.
Parameters
Transmit key number. Range: 1 -4.
<key number>
CLI commands
Virtual AP context
2-101