Firmware-Update Automatic - HP MSM765zl Reference Manual

firmware-update automatic

Supported on: MSM710 E-MSM720 MSM760 MSM765zl
firmware-update automatic
Enables scheduled firmware upgrades.
no firmware-update automatic
Disables scheduled firmware upgrade.
The controller can automatically retrieve and install firmware from a local or remote URL at
preset times. By placing controller firmware on a web or ftp server, you can automate the update
process for multiple units.
When the update process is triggered the controller retrieves the first 2K of the firmware file to
determine if it is different from the active version. If different, the entire firmware file is then
downloaded and installed.
(Different means older or newer. This enables you to return to a previous firmware version if
required).
Configuration settings are preserved during the update unless stated otherwise in the release
notes for the firmware. However, all active connections will be terminated. Customers will have
to log in again after the controller restarts
firmware-update start
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
firmware-update start
Upload the firmware based on a specified URI. This URI can be set with the command: firmware-
update uri.
firmware-update time
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
firmware-update time <time>
Sets the time of day the scheduled firmware upgrade will take place.
Parameters
Time as hh:mm:ss. For example: 15:44:00.
<time>
firmware-update uri
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
firmware-update uri <uri>
Sets the URI where the controller will retrieve new firmware.
no firmware-update uri
Clears the firmware URI.
CLI commands
Config context
2-37