Authentication Server Access Controller - HP MSM765zl Reference Manual

CLI commands
Virtual AP context

authentication server access controller

Supported on:
authentication server access controller
Use the access controller to authenticate 802.1X or WPA logins.
authentication server accounting
Supported on:
authentication server accounting
Enables RADIUS accounting for this VSC (VAP).
no authentication server accounting
Disables RADIUS accounting for this VSC (VAP).
authentication server accounting radius profile
Supported on:
authentication server accounting radius profile <name>
Sets RADIUS accounting to use the specified RADIUS profile.
no authentication server accounting radius profile
Removes accounting support for 802.1X.
authentication server radius
Supported on:
authentication server radius <name>
Sets the RADIUS profile to use for 802.1X or WPA authentication.
dot1x authentication
Supported on:
dot1x authentication (local | radius | active-directory)
Sets the authentication for 802.1X and WPA.
wpa-psk
Supported on:
wpa-psk <key>
Sets the WPA preshared key.
no wpa-psk
Deletes the WPA preshared key.
Parameters
password
2-102
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
Specify a key that is between 8 and 64 ASCII characters in length. It is
recommended that the preshared key be at least 20 characters long, and be
a mix of letters and numbers.