Termination Action - HP MSM765zl Reference Manual

termination action

Supported on: MSM710 E-MSM720 MSM760 MSM765zl
termination action (logout | reauthenticate)
Sets the termination action.
use termination action
Use the termination action.
no use termination action
Do not use the termination action.
user defined attribute
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
user defined attribute <name>:<type>:<vendor-id>:<vendor-type>:<format>:<value>
Add a new user defined attribute.
no user defined attribute <description>
Add a new user-defined attribute.
Parameters
Friendly name for this attribute.
<name>
Numerical RADIUS type, 26 is Vendor-Specific.
<type>
If RADIUS type is 26, contains the Vendor-Id. Put 0 if not.
<vendor-id>
If RADIUS type is 26, contains the Vendor-Type. Put 0 if not.
<vendor-type>
Is one of: 'integer', 'address', 'text', 'string' or 'time'.
<format>
Contains the actual value.
<value>
Format description and values:
integer: value is a numerical string.
address: value is a legal IP address, or possibly a host name.
text: value is any string of alphanumerical characters.
string: value is a series of hexadecimal digits.
time: value is a time string.
For related information, see RFC 2138, Section 5.
public ip subnet
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
public ip subnet
Set profile to use the public IP subnet for IP Addressing once authenticated.
no public ip subnet
Removes this attribute.
use public ip subnet
Use this attribute.
CLI commands
Session profile context
2-83