PPTP client interface
Path: View > Enable > Config > PPTP client interface
Use this context to configure the PPTP client.
active
Supported on:
MSM710 E-MSM720 MSM760 MSM765zl
active
Sets PPTP client connection to 'up'.
no active
Sets PPTP client connection to 'down'.
pptp client credentials
Supported on:
MSM710 E-MSM720 MSM760 MSM765zl
pptp client credentials <name> <password>
Sets the PPTP username and password.
pptp client domain name
Supported on:
MSM710 E-MSM720 MSM760 MSM765zl
pptp client domain name <name>
Sets the domain name used by the PPTP client.
pptp client server address
Supported on:
MSM710 E-MSM720 MSM760 MSM765zl
pptp client server address <address>
Sets the IP address to connect to.
end
Supported on:
MSM710 E-MSM720 MSM760 MSM765zl
end
Switches to parent context.
ip nat
Supported on:
MSM710 E-MSM720 MSM760 MSM765zl
ip nat
Enables NAT for the PPTP client.
no ip nat
Disables NAT for the PPTP client.
CLI commands
PPTP client interface
2-135