Lldp Config - HP MSM765zl Reference Manual

CLI commands
Config context

lldp config

Supported on:
lldp config <port>
Edit LLPD port specific options.
lldp dynamic-name
Supported on:
lldp dynamic-name
Enables the LLDP dynamic naming feature.
no lldp dynamic-name
Disables the LLDP dynamic naming feature.
lldp dynamic-name refresh-time
Supported on:
lldp dynamic-name refresh-time <time>
Sets the interval at which dynamic names for controlled APs are updated.
lldp dynamic-name user-string
Supported on:
lldp dynamic-name user-string <name>
Specifies the text to use for the dynamic name.
You can use regular text in combination with placeholders to create the name. Placeholders are
automatically expanded each time the name is regenerated.
Placeholders
%RN
%RP
%SN
%IP
lldp fast-start-count
Supported on:
lldp fast-start-count <count>
After an MED LLDPDU is received, this timer is started and the agent sends one MED LLDPDU to
the MED device each second as it counts down.
2-42
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
System name of the neighboring device to which the port is connected,
obtained via the System Name TLV. Since this is an optional TLV, if it is not
available, the Chassis ID TLV is used instead.
Port description of the port on the neighboring device to which the local
port is connected, obtained via the Port Description TLV. Since this is an
optional TLV, if it is not available, the Port ID TLV is used instead.
Controller's serial number.
Controller's IP address. An IP address can require up to 15 characters
(nnn.nnn.nnn.nnn).
MSM710 E-MSM720 MSM760 MSM765zl