Ntp Protocol - HP MSM765zl Reference Manual

ntp protocol

Supported on: MSM710 E-MSM720 MSM760 MSM765zl
ntp protocol (ntp | sntp)
Sets the network time protocol to use.
ntp server
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
ntp server
Enable this option to have the controller periodically contact a network time server to update its
internal clock.
no ntp server
Disables the use of a network time server.
clock custom dst begins
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
clock custom dst begins <day> <weekday> <month> <time>
Set parameters of the rule defining the beginning of daylight savings time.
Parameters
Day of the month. Range 1 - 31.
<day>
Weekday. Valid values are: "sun", "mon", "tue", "wed", "thu", "fri", "sat".
<weekday>
Month. Valid values are: "jan", "feb", "mar", "apr", "may", "jun", "jul", "aug",
<month>
"sep", "oct", "nov", "dec".
Time as hh:mm[:ss]. For example: 15:44:00.
<time>
If a parameter does not apply to the configured DST rule format, simply set this parameter to any
valid value.
clock custom dst begins format
Supported on: MSM710 E-MSM720 MSM760 MSM765zl
clock custom dst begins format (<fixed>|<last-weekday>|<following-
date>|<preceding-date>
Set the format of the custom DST rule.
Parameters
Rule of the form: The [Day]th of [Month] at [Time].
<fixed>
Rule of the form: The last [Weekday] of [Month] at [Time].
<last-weekday>
Rule of the form: The first [Weekday] on or after the [Day]th of [Month] at
<following-date>
[Time].
Rule of the form: The first [Weekday] on or before the [Day]th of [Month]
<preceding-date>
at [Time].
CLI commands
Config context
2-23