Show Sflow Sampling-Polling - HP MSM765zl Reference Manual

show sflow sampling-polling

Supported on:
show sflow <receiver> sampling-polling [<interface>]
Shows sFlow sampling and polling configuration for a receiver.
sflow sampling
Supported on:
sflow <receiver> sampling <interface> <rate>
Specifies the number of packets between samples. For example, if set to 5, every fifth packet will
be sampled. 0 disables sampling.
sflow polling
Supported on:
sflow <receiver> polling <interface> <interval>
Specifies the maximum interval (seconds) between polling of counters. 0 disables polling.
sflow interface
Supported on:
sflow interface <ifindex>
Makes the given sFlow interface visible to sFlow collectors.
no sflow interface <ifindex>
Makes the given interface invisible to sFlow collectors.
mac lockout entry
Supported on:
mac lockout entry <mac>
Adds a new entry to the MAC lockout list.
no mac lockout entry <mac>
Removes the entry from the MAC lockout list.
show mac lockout
Supported on:
show mac lockout
Displays all entries in the MAC lockout list.
team communication ip address
New
Supported on: E-MSM720 MSM760 MSM765zl
team communication ip address <ip address>/<mask>
Sets the team communcation VLAN IP Address.
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
CLI commands
Config context
2-59