CLI commands
Config context
soap-server allow
Supported on:
soap-server allow <ip address>/<mask>
Adds a host to the list of IP addresses from which access to the SOAP interface is permitted.
no soap-server allow <ip address>/<mask>
Removes a host from the list of IP addresses from which access to the SOAP interface is
permitted.
Parameters
<address>
</mask>
soap-server http authentication
Supported on:
soap-server http authentication
Enable the SOAP server HTTP authentication.
no soap-server http authentication
Disable the SOAP server HTTP authentication.
soap-server http authentication password
Supported on:
soap-server http authentication password
Set the SOAP server HTTP authentication password.
soap-server http authentication username
Supported on:
soap-server http authentication username
Set the SOAP server HTTP authentication username.
soap-server port
Supported on:
soap-server port <port number>
Sets the port the controller will use to respond to SOAP requests.
Parameters
<port number>
soap-server ssl
Supported on:
soap-server ssl
SSL enabled for SOAP server.
2-34
MSM710 E-MSM720 MSM760 MSM765zl
IP address.
Subnet mask in CIDR format. Specifies the number of bits in the mask.
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
MSM710 E-MSM720 MSM760 MSM765zl
SOAP port number. Range 1 - 65535.
MSM710 E-MSM720 MSM760 MSM765zl