Hardware; General Hardware Description; Board Slot Positions - Deif GPC-3 Installation Instructions Manual

ML-2 installation instructions 4189340582
UK

4. Hardware

4.1 General hardware description

4.1.1 Board slot positions

The unit housing is divided into board slot positions. This means that the unit consists of a number of printed
circuit boards (PCBs) mounted in numbered slots. The green terminal blocks are then mounted in the PCBs.
Some of these board slots are standard and some are intended for options. The board slot positions are ar-
ranged as illustrated below.
Slot Term. GPU/GPU Hydro
Slot #1 1-28 Standard
Slot #2 29-36 Option
Slot #3 37-64 Option M12
Slot #4 65-72 Option
Slot #5 73-89 Standard
Slot #6 90-97 Option
Slot #7 98-B3 Option
Slot #8 126-133 Option
DEIF A/S
GPC/PPU Description
Standard Power supply board
Option Option:
H2 (Modbus RS-485)
H3 (Profibus)
H8.2 (Beckhoff ext. I/Os)
H9.2 (Modbus RS-232)
M14.2 (4 × relay outputs)
Standard GPC/PPU: Load sharing and I/O board
GPU/GPU Hydro: I/O extension
Standard Option:
(4 × relay outputs) E1 (2 × +/-25 mA outputs)
E2 (2 × 0(4) to 20 mA outputs)
EF2 (1 × +/-25 mA, 1 × 0(4) to 20 mA)
EF4 (1 × +/-25 mA, 2 × relay outputs)
EF5 (1 × PWM, +/-25 mA, 2 × relay outputs)
EF6 (1 × PWM, 2 × +/-25 mA outputs)
M14.4 (4 × relay outputs)
Standard AC measuring
Option Option:
F1 (2 × analogue outputs)
M13.6 (7 × digital inputs)
M14.6 (4 × relay outputs)
M15.6 (4 × analogue inputs)
Option M4 (engine interface board or I/O extension)
- CAN I/F A (H7 - J1939)
- CAN I/F B (reserved)
Option Option:
G9 (CAN bus load sharing)
M13.8 (7 × digital inputs)
M14.8 (4 × relay outputs)
M15.8 (4 × analogue inputs)
H5, H6 (engine communication)
H8.8 (Beckhoff ext. I/Os)
Hardware
Page 11 of 64