Chapter 3 Hardware Requirements; Table 3-6 Sample Axis Port Assignment; Table 3-7 Number Of Required Interface Etus - NEC Xen Master System Hardware Manual

NEC Australia Pty Ltd
Telephone
Ports
1 ~ 8
S1
3 - 42
Xen Axis:
S1
S2/ISA
S3
S4
S5
S6
S7

Table 3-6 Sample Axis Port Assignment

MIF Ports
01 1~8
S2 S3
7.2.2 Determining the Number of Required Interface ETUs
Table 3-7 Number of Required Interface ETUs indicates
each feature and the associated hardware necessary for
the operation of the feature.

Table 3-7 Number of Required Interface ETUs

Feature
Least Cost Routing
SMDR
PC Programming
Caller ID (Refer to Note)
Uniform Call Distribution
Automatic Call Distribution
(Xen Master Only)
Note: The Caller ID feature works without the MIFM-U13 ETU. However,
the Caller ID scrolling and dialling functions both require the MIFM-
U13 ETU.
Slot
ESI(8)-U13 (Built-in)
MIFM-U13
COI(8)-U13
TLI(2)-U13
ESI(8)-U13
SLI(8)-U13
VMS(8)-U13
Telephone Telephone
Ports Ports
9~10 9~16
S4 S5
Required ETU or
Unit
MIFM-U13
MIFM-U13
MIFM-U13
MIFM-U13
MIFA-U13
MIFA-U13
Xen Master & Xen Axis
ETU
Telephone Telephone
Ports
17~24 25~32
S6 S7
Maximum
Required
ETUs per
Feature Key
System
KMM(XXX)UA 1
or
KML(XXX)UA
None 1
None 1
KMM(XXX)UA 1
None 1
KMA(XXX)UA 1
Hardware Requirements
Ports