Cooling Fan Replacement: 2A0110 And 2A0138, 4A0058 And 4A0072 - YASKAWA T1000A Technical Manual

u Cooling Fan Replacement: 2A0110 and 2A0138, 4A0058 and 4A0072
WARNING! Electrical Shock Hazard. Do not connect or disconnect wiring while the power is on. Failure to comply can result in serious
personal injury. Before servicing the drive, disconnect all power to the equipment. The internal capacitor remains charged even after
the power supply is turned off. After shutting off the power, wait for at least the amount of time specified on the drive before touching
any components.
CAUTION! Burn Hazard. Do not touch a hot drive heatsink. Failure to comply could result in minor or moderate injury. Shut off the
power to the drive when replacing the cooling fan. To prevent burns, wait at least 15 minutes and ensure the heatsink has cooled
down.
NOTICE: Prevent Equipment Damage. Follow cooling fan and circulation fan replacement instructions. Improper fan replacement
could result in damage to equipment. When installing the replacement fan into the drive, make sure the fan is facing upwards. To
ensure maximum useful product life, replace all fans when performing maintenance.
n
Removing the Cooling Fan
1.
While pressing in on the hooks located on the left and right sides of the fan cover, free the fan cover leading by
lifting the back end first.
Figure 7.8
Figure 7.7 Removing the Cooling Fan Cover: 2A0110 and 2A0138, 4A0058 and 4A0072
2.
Lift the fan cover out leading with the back end. Unplug the replay connector and free the fan cover from the
drive.
Figure 7.9
YEC_TMonly
Figure 7.8 Removing the Cooling Fan: 2A0110 and 2A0138, 4A0058 and 4A0072
YASKAWA ELECTRIC SIEP C710616 30B YASKAWA AC Drive T1000A Technical Manual
7.4 Cooling Fan and Circulation Fan
Lift the fan cover out of the drive
leading with the back end.
YEC_
TMonly
7
323