Chapter 2 Routine Maintenance Guidelines - Thermo Scientific NITON XL3t 500 User Manual

Routine Maintenance Guidelines
Battery Pack and Battery Charger
Recharging The Battery
2-2 NITON XL3 Analyzer User's Guide
Fully recharging a battery pack takes approximately 2 hours.
Pack
1. Remove the battery pack from the analyzer.
2. Place the battery pack upside down into the charger. The battery
pack is keyed, and will only fit into the charger fully one way. If
your battery pack is resting on the back of the back of the
charger rather than sliding all hte way to the bottom, remove the
battery pack, turn it around, and re-insert it into the charger.
3. The red light is on when the charger is plugged in. This is the
power indicator light.
Figure 2-1. Power Indicator Light
4. The yellow light indicates that the battery pack is currently being
charged..
Figure 2-2. Charging Light
Power Indicator Light
Charging Indicator Light
Power Indicator Light
Thermo Scientific