Thermo Scientific NITON XL3t 500 User Manual page 123

The Set Element Threshold Menu
The Editor is very similar to the Logon Screen. The "C" button clears the
field, and the "<" button clears the last numeral. Select the numerals you
want, then press "E" to enter the number. "OFF" resets the value to "OFF"
Selecting the Fail Value will open up the Fail Editor for the selected
element.
Figure 1-45. The Fail Editor
The Fail Editor works the same as the Pass Editor.
When you press the "E" button in either editor, you are returned to the
Pass/Fail Settings Screen, with your new values in place.
Selecting the "OFF" button not only sets the value to "OFF" but also saves
the new value.
Thermo Scientific NITON XL3 Analyzer User's Guide 1-109