Maintenance, Cleaning And Repairs - Thermo Scientific NITON XL3t 500 User Manual

Routine Maintenance Guidelines

Maintenance, Cleaning and Repairs

Maintenance,
To ensure the reliability, durability, and performance of your NITON
Cleaning and Repairs
Analyzer, keep it clean—especially the transparent measurement window
covering the analysis window. Clean the measurement window gently with a
cotton swab. Clean the body of the analyzer with a soft cloth. Never use
detergents, or solvents on your analyzer, or immerse your analyzer in water.
If the measurement window becomes frayed, ripped, or contaminated with
metal particulates, replace it with a new window. measurement windows
(Standard Window Niton P/N 187-1555 or Helium Purge Window Niton
P/N 187-1454) may be ordered from Thermo Fisher Scientific's Service
Department in the United States, toll free, at (800) 875-1578, or outside
the United States, at +1-978-670-7460 or from your local Authorized
NITON Analyzers Service Center.
From time to time, your touch screen will need cleaning. NITON
recommends that you use a lens cleaning solution with a soft cloth. Do not
use water to clean your NITON Analyzer.
WARNING! All Service, except exterior cleaning and measurement window
replacement, must be performed by Thermo Scientific or an Authorized
NITON Analyzers Service Center. Do not attempt to make repairs yourself.
Opening the case of your NITON will void the analyzer Warranty in its
entirety.
CAUTION Always obtain a Return Authorization (RA) number from
Thermo Fisher Scientific's Service Department in the United States, toll
free, at (800) 875-1578, or outside the United States, at +1-978-670-7460
before returning your analyzer to the NITON Service Department or local
Authorized NITON Analyzers Service Center.
Thermo Scientific NITON XL3 Analyzer User's Guide 2-5