Thermo Scientific NITON XL3t 500 User Manual page 113

Thermo Scientific
Select Radio
Button
Figure 1-32. The Calfactors Screen
Select the radio button of the Calibration Factor you wish to edit, then
select the appropriate Edit Button. The Calibration Edit Screen will open.
You cannot edit the Factory Calibration. You may edit and store up to four
alternate calibrations per Mode.
Select here to edit
this element's Slope
Figure 1-33. The Calibration Edit Screen
The Adjust Calibration Screen
Select Edit
Button
Select here to edit
this element's
Intercept
NITON XL3 Analyzer User's Guide 1-99