Thermo Scientific NITON XL3t 500 User Manual page 82

The Specs Screen
Specs Information
Instrument Specific Serial
Model Number
Date And Time
1-68 NITON XL3 Analyzer User's Guide
The following is the information supplied on the Specs Screen:
This is located in the left part of the blue band at the top of the screen.
Number
This is located in the right part of the blue band at the top of the screen.
This is the current Date and Time. This is particularly important for date
stamping.
SW Version This is the currently loaded software version, which should be reported to
Service if there is any problem.
FPGA
This is the currently loaded FPGA software version, which should be
reported to Service if there is any problem. FPGA versions are always a four
digit number. Any other number of digits may be a sign of a problem in the
FPGA code.
Factory QC
This is the date that the machine was QCed at the factory.
Energy Cal This line notes the last time a user detector calibration was performed.
Battery
This line gives the proportional charge remaining to the battery.
Thermo Scientific