Camera And Small Spot Video - Thermo Scientific NITON XL3t 500 User Manual

Camera and Small Spot Video

Camera and Small
The Camera feature is only usable with properly configured analyzers, and
Spot Video
the Small Spot feature is only available on Small Spot analyzers.
If your analyzer is equipped with an internal video camera, you can turn
that camera on and off, and turn the saving of images with the readings on
and off through an interface. When the camera is on, the image will show in
the Ready to Test screen, as in Figure 1-4. If the camera is off, saving of
images will also be off. If the camera is on and the image saving function is
also on, the images will automatically be saved with the reading. Saving
images will curtail the maximum number of readings stored.
How to Use the Camera
When a Camera equipped XL3 analyzer is in the Ready to Test screen, the
video feed appears live on the analyzer's touch screen. This is the image that
can be saved with the sample analysis. When you take a measurement, if you
choose to do so, the bitmap image will be saved on the analyzer along with
the analysis results. The interface is accessible through the Instrument
Setup/Hardware Setup menu, as in Figure 1-2.
Figure 1-1. The Hardware Setup Menu Path
Thermo Scientific NITON XL3 Analyzer User's Guide 1-75