Thermo Scientific NITON XL3t 500 User Manual page 72

The Erase Readings Screen
Library Name
Element to be Edited
Minimum Percentage
1-58 NITON XL3 Analyzer User's Guide
Figure 1-15. The Element Specification Screen
This is the name of the library you are editing. Make sure you are editing the
correct library before proceding further.
Alloy Name
This is the name of the alloy you are editing. Make suere you are editing the
correct alloy before proceding further.
This is the element you need to edit for this alloy.
This is the lowest amount of the element in question you want to be in the
alloy. If the element in the analyzed sample is any lower, the sample will not
be recognized as this alloy. Selecting the element minimum will open the
Minimum Editor.
Library Name
Alloy Name
Element to be edited
Minimum Percentage
Maximum Percentage
OK Button
Cancel Button
Thermo Scientific