Thermo Scientific NITON XL3t 500 User Manual page 157

Entering Data with a Barcode reader
Setting Up and Using the
The USB port is the narrow inverted trapezoidal port on the back of your
XL3 Analyzer. You can use this port, along with the supplied cable, to
USB port
communicate with your analyzer.
Mini USB Port
Figure 2-27. Location of Mini-USB port
Insert the smaller end of your USB cable into the Mini-USB port on the
back of your XL3, and the larger end into any USB port on your computer.
When you turn your analyzer on after it is connected, or if you connect it
while the analyzer is on, a "Found New Hardware" Wizard will open, as in
Figure 2-28.
Figure 2-28. Found New Hardware Wizard
Thermo Scientific NITON XL3 Analyzer User's Guide 2-29