Entering Data With A Barcode Reader - Thermo Scientific NITON XL3t 500 User Manual

Entering Data with a
Barcode reader
Thermo Scientific
You can also use Bluetooth barcode readers with your analyzer. Connect
your reader to your analyzer in the usual way, see See Chapter 2 page 11 for
details. Once the reader is connected, you can use it to input data into your
analyzer.
• On the data entry screen, highlight the desired field.
• While pressing the button on the Barcode Pencil, swipe the desired
barcode. If the pencil successfully reads the barcode, it will beep.
• The barcoded data will show up in the data field after the beep. There
is a short delay while the information is being transmitted
• You may also use the Virtual Keyboard Screen to enter barcoded
data.
You can replace, append or clear any field with a custom barcode:
• R05TEXT replaces field 5 with the TEXT
• A05C – appends field 5 with the letter C
• C05 – clears field 5
• C00 – clears all fields

Entering Data with a Barcode reader

NITON XL3 Analyzer User's Guide 2-27