Thermo Scientific NITON XL3t 500 User Manual page 8

The LCD Touch Screen
The LCD Touch
iv NITON XL3 Analyzer User's Guide
The LCD Touch Screen on your XL3 Analyzer is designed to swing up and
Screen
down to different angles for ease in viewing and interacting with your
analyzer. The LCD Touch Screen is connected to your analyzer along the
base of the screen, right above the Control panel. The screen is not designed
to separate from the analyzer, but can be adjusted to any arbitrary angle
between zero degrees - that is, flush with the analyzer - and 85 degrees,
which is almost perpendicular. The LCD Touch Screen will stay at any
given angle between these extremes until moved to a different angle. When
in closed position, the screen is secured by a catch at the top center of the
screen housing.
Figure 0-3. XL3 Analyzer Showing LCD Screen Tilted.
• To raise the LCD Touch Screen, disengage the catch at the top-center of
the LCD Touch Screen housing and gently pull the screen towards you
until it is at the best angle for your use.
• To close the LCD Touch Screen, gently push away from you along the
top edge of the screen housing. The screen will swing down until the
catch solidly engages with an audible click.
Note The LCD Touch Screen cannot be removed from your XL3 analyzer.
Removing or attempting to remove the LCD Touch Screen will damage
your analyzer and void your warranty.
Note Always close your LCD Touch Screen before storing or transporting
your XL3 analyzer.
Thermo Scientific