Routine Maintenance Guidelines; Battery Pack And Battery Charger - Thermo Scientific NITON XL3t 500 User Manual

Battery Pack and
Battery Charger
Replacing The Battery
Thermo Scientific
Chapter 2
Guidelines
Each NITON Analyzer is shipped with two lithium ion battery packs.
When fully charged, the battery pack provides approximately 6-8-12 hours
of use, depending on duty cycle.
Replacement battery packs (NITON part number 420-002) may be ordered
from NITON in the United States, toll free, at (800) 875-1578, or outside
the United States, at +1-978-670-7460, or from your local Authorized
NITON Analyzers Service Center.
Note Before beginning a test, be certain that the battery has sufficient
charge.
CAUTION Do not leave the battery pack connected to the charger for
excessive periods of time. Overnight recharging is recommended.
CAUTION Store the analyzer and the spare battery packs in a cool place,
away from direct sunlight.
1. Slide back the catch on the bottom of your analyzer's pistol grip
and drop the battery out into your hand.
Pack
2. Place the old battery aside and slide the new battery up into the
cavity in the bottom of the pistol grip. The battery is keyed, and
will only insert fully one way.
3. Press in until the latch resets.
Routine Maintenance
NITON XL3 Analyzer User's Guide 2-1