Table of Contents
Advertisement
INSTRUMENT WARNING LIGHTS
Removal
1. Remove the instrument pack and all 3
instruments as described in 'Instruments
Removal'.
2.
Remove the screws securing the instrument facia
to its housing.
Remove the screws securing the warning light
3.
cover housing to the instrument pack, and
remove the housing.
4.
Pull out the holder of the bulb to be accessed,
and remove the bulb.
1. Bulb Holders
2. Warning Light Housing
Installation
1.
Installation is the reverse of the above.
RELAY PACK
A relay pack is situated beneath the front seat which also
contains the indicator unit.
The relay are attached to the bracket by means of barbed
extensions. Never exert extreme force when removing a
relay as this may cause damage and never
relay block connector.
Identification of Relays
1. Indicator Unit
2. Headlamp Dip Beam
3. Headlamp Main Beam
4. Headlamp Cut—out*
5. Cooling Fan
6. Fuel Pump
7. ECM Main Power Relay
* (Daytime lights-on countries only)
16.29
ELECTRICAL SYSTEM 16
pull on the
.
Hide quick links:
Advertisement
Table of Contents
