Service Data - Date; Main Menu - Triumph T595 DAYTONA Service Manual

7. SERVICE DATA - DATE

SERU'! CE
DATE 01 /05/48
Enter the date using the 'Up' and `Down' keys in the same
way that the Dealer number was entered.
NOTE:
•
6 digits must always be entered, e.g. if it is the
7th month this must be entered as 07.
• The date must be entered in the order
Day/Month / Year.
When complete, press the Validation key'*' to display -

'MAIN MENU'.

FUEL SYSTEM/ENGINE MANAGEMENT 9
8. MAIN MENU
DATA
I ►
When this screen is displayed, you have to decide
whether to proceed along one of two routes:
- `DIAGNOSTICS'
- `CHECK/ADJUST'
The `DIAGNOSTICS' menu provides access to:
Current data e.g. actual engine temperature, engine
speed etc.
Diagnostic Trouble Codes (DTC's) i. e. access to
codes stored in the motor cycle ECM which indicate a
confirmed fault(s) in the system.
Function tests e.g. of tachometer, water temperature
gauge, fuel pump etc.
The `CHECK/ADJUST' menu provides:
Checks i.e. build information, system data.
Adjustments e.g. adjustment of idle fuel, RPM etc., and
entry of software updates.
Use the `Up and Down' keys to position the cursor
opposite the desired choice, and press the Validation key
' *'
Either `DIAGNOSTICS' (operation 9) or
`CHECK/ADJUST' (operation 27) will be displayed,
dependent on the selection.
NOTE:
•
If `QUIT' is selected and the validation key ` *'
pressed, the display will return to `TRIUMPH
MOTORCYCLES'.
9.35
fiRi n
DI ftGn`osrr
.
HECK / R D J,U 5 7
1
QUIT
rr Fnu
CS
I