9 FUEL SYSTEM/ENGINE MANAGEMENT
FUEL PRESSURE REGULATOR
Remove the seat and disconnect the battery
1.
negative (black) lead first.
Remove the fuel tank as described elsewhere in
2.
this section.
3.
Drain the fuel tank into a suitable container.
WARNING: Observe the warning advice
given in the general information section
on the safe handling of fuel and fuel containers.
A fire, causing personal injury and damage to
property could result from spilled fuel or fuel not
handled or stored correctly.
Remove the circlip securing the pressure
4.
regulator to the fuel pump mounting plate.
1
1. Fuel Pressure Regulator
2. Circlip
5.
Ease the pressure regulator from the mounting
plate.
Remove and discard the regulator `O' rings.
6.
Assembly
Fit new `O' rings to the pressure regulator and
1.
lightly lubricate the `O' rings with petroleum jelly.
Fit the pressure regulator and retain with a new
2.
circlip.
3.
Refit the fuel tank as described elsewhere in this
section.
4.
Refill the fuel tank with the fuel drained earlier.
5.
Reconnect the battery, positive (red) lead first.
6.
Refit the seat.
FUEL HOSE CONNECTORS
NOTE:
•
Fuel hose connectors are fitted to the mounting
plate using a tapered screw thread.
Removal
1.
Remove the seat and disconnect the battery
negative (black) lead first.
2.
Remove the fuel tank as described elsewhere in
this section.
3.
Drain the fuel tank into a suitable container.
WARNING: Observe the warning advice
given in the general information section
A
on the safe handling of fuel and fuel containers.
A fire, causing personal injury and damage to
property could result from spilled fuel or fuel not
handled or stored correctly.
4.
Unscrew the fuel hose connectors from the
mounting plate.
1
2
gait
1. Mounting Plate
2. Connectors
Inspection
1.
Check the connector for cracks, thread damage
and splits.
2.
Check that the connecting hose is being correctly
retained and that the connection is fuel tight.
9.80