Triumph T595 DAYTONA Service Manual page 119

7 TRANSMISSION
8. Release the screws securing the oil pump to the
lower crankcase.
1
o
gagz
1. Oil Pump Retaining Screws
Invert the crankcase.
9.
10. Remove the oil pump from inside the lower
crankcase.
11. Remove the oil pressure relief valve.
12. Remove the 2 screws securing the selector drum
stop plate to the crankcase. Remove the stop plate.
gadb
1. Selector Drum Stop Plate
13. Remove the screw securing the detent wheel to the
selector drum. Remove the detent wheel.
NOTE:
• The selector drum will not turn through 3600
provided the stop plate has been removed.
1
v o
o \ 1 0j
! 0
1
1
r J
14. Remove the spring abutment bolt from the gear
quadrant and slide the quadrant out of mesh.
^ ^II
/;^1
1. Quadrant
2. Abutment Bolt
15. Remove the capscrew from the bearing lock (detent
end of the selector drum).
1
1 ^
1. Detent Wheel Bolt
2. Detent Wheel
3. Selector Drum Bearing
4. Selector Drum
5. Dowel
6. Bearing Lock
7. Capscrew
16. Remove the selector drum bearing by pushing
through from inside the crankcase to outside using
hand pressure only.
7.14
T MPH
6.
7