Seat Removal And Installation; Universal Serial Bus (Usb) Socket - Triumph Thruxton TFC 2019 Owner's Handbook Manual

Seat Removal and Installation

Warning
To prevent detachment of the seat
during riding, after installation always
grasp the seat and pull firmly upwards.
If the seat is not correctly secured in
the lock, it will detach from the lock.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
Seat Removal
To remove the seat:
• Insert the ignition key into the seat
lock and turn it counterclockwise.
• This will release the seat from its
lock.
• Slide the
rearwards for complete removal
from the motorcycle.
Seat Installation
To reinstall the seat:
• Engage the
underneath the bracket near the
fuel tank.
• Line up the hinges and press down
at the rear to engage the seat lock.
Note
An audible click can be heard when the
seat is fully engaged into its lock.
seat upwards
seat's tongue
General Information
Universal Serial Bus (USB)
Socket
The USB socket is not waterproof
unless the waterproof cap is installed.
Do not connect electronic devices
while it is raining.
Water in the USB socket could lead
to an electrical problem, resulting in
motorcycle damage, loss of motorcycle
control and an accident.
Do not leave the ignition switch in
the ON position unless the engine
is running as this will discharge the
battery.
and
Warning
Caution
51