Removing The Swinging Arm - Triumph T595 DAYTONA Service Manual

NOTE:
• If tight, an M14 (1.5 mm thread pitch) bolt can be
threaded into the spindle to assist extraction.
Removing drop link spindle
22. Release the swinging arm spindle bolts from both
sides of the motorcycle.
23. Using tool T3880295, remove the locking ring from
the right hand side of the swinging arm spindle.
I
e
1. Tool T3880295
2. Locking ring
24. Using tool T3880290, slacken the swinging arm
clamping ring from the right hand side of the
swinging arm spindle.
1
^ o I
^
i4 i
1. Tool T3880290
2. Clamping ring
25. Support the swinging arm and remove the swinging
arm spindle.
yacw
1. Swinging arm spindle
26.
Carefully detach the arm from the frame and feed
the rear suspension unit upper section and
reservoir through the hole in the swinging arm.
{
gait

Removing the swinging arm

11.15
REAR
SUSPENSION
N2
1
11