Henny Penny FlexFusion FGE 615 Service Instructions Manual page 33

Performing the update
SFL
Image 4: SFL - software update
USb SFL
Image 5: USB stick with software
update detected
USb SFL
Image 6: USB stick or software
update not detected
---
Image 7: Software update active - do
not turn off unit
INFORMATION
Call up the Settings menu or Service menu
service menu‟, Page
The password for the Settings menu is 111.
Select Software Update using the left rotary knob "SFL".
Press the "START STOP" button.
The left display shows "USb".
The middle display shows "SFL".
The right display shows "no" when update is not detected on the
no
USB stick.
Check contents of USB stick. Both files must be present.
Check USB stick.
Press the "START STOP" button for 3 seconds.
Update begins.
The middle display shows "---".
The update can take up to 20 minutes. The software is restarted several times.
Do not switch unit off.
Finally an automatic restart of the software occurs.
Service instructions
12).
Software update
(see „5.1.1 Calling
33