Relay Test (Rel) - Henny Penny FlexFusion FGE 615 Service Instructions Manual

5.4 Relay test (rEL)

Description
INFORMATION
Overview
Select relay
Switch on relay Relay with push-button switch
Exit selection
Separate control of the relay.
Testing the relay.
Testing the connected components.
Relays K1 and K16 are switched on permanently.
A plurality of relays are switched on simultaneously.
r1 reL
Use the left knob to select relay.
Display on the left shows selected relay.
Display on the right shows the switching state of the selected
relay (ON / OFF).
Press the "START STOP" button.
Relay is switched on.
Display on the right shows the relay count divided by 100.
Switch on the relay long-lasting
Press the "START STOP" button for 3 seconds.
Relay is switched-on permanently until "START STOP" button
is pressed again.
Display on the right shows the switching state of the selected
relay (ON / OFF).
• More relays can be additionally selected and switched on.
Switch on the time-controlled relay
Setting the switch with rotary knob right. Display on the right
shows the set time in seconds.
Press the "START STOP" button.
That is, the relay is switched on for the set time.
Press the "START STOP" button to turn off relay prematurely.
Press the "STEP" button.
Service instructions
Service menu - unit test
ON
15