Deleting The Error Memory (Ecl); Software Update (Sfl) - Henny Penny FlexFusion FGE 615 Service Instructions Manual

Service menu - unit test

5.10 Deleting the error memory (ECL)

Description Deleting the entire error memory.
Overview
Deleting the memory
Exit selection

5.11 Software update (SFL)

Description
Overview
Perform update
26
CLr
ECL
Press the "START STOP" button for 3 seconds.
The right display shows "rdy".
Press the "STEP" button.
Upgrade of the software using the USB interface.
USb SFL
Image: USB stick or software update not detected
USb SFL
Image: USB stick with software update detected
---
Image: Software update active - do not turn off unit
Implementation as described
32).
Press the "START STOP" button for 3 seconds.
Update begins.
The middle display shows "---".
The update can take up to 20 minutes to complete.
Automatic restart of the software.
Service instructions
rdy
no
(see „6 Software update‟, Page