Backup Of (Pep) - Henny Penny FlexFusion FGE 615 Service Instructions Manual

No. Basic setting
47 Solenoid control when
closing the cooking chamber
door
48 Steam elimination mode
49 Switch of the cooking
chamber light when opening
the cooking chamber door
50 Switch on the cooking
chamber light when closing
the cooking chamber door

5.14 Backup of (PEP)

Description Export function of the parameters (for example calibration values).
Requirement
Overview
Backup of data
Exit selection
Standard Range of
value adjustment
5 0 – 5
1 0 = Low
1 = Normal
2 = High
4 0-60 seconds
1 0-60 seconds
USB flash drive is in the USB interface.
USb
PEP
Press the "START STOP" button.
Left display shows "USb".
The right display shows "---" continuously.
• The right display shows " End " after complete transmission.
The right display shows " no " when USB stick was not detected.
•
Press the "STEP" button.
Service instructions
Service menu - unit test
Explanation
• Intern. Do not change this value!
• "Low" setting: Minimum water consump-
tion, but higher condensate temperature
and greater steam volume. "High" setting:
Maximum water consumption, but lower
condensate temperature and smaller
steam volume.
• Intern. Do not change this value!
• Intern. Do not change this value!
---
29