Recovering Data (Pip); Configuration Settings (Con) - Henny Penny FlexFusion FGE 615 Service Instructions Manual

Service menu - unit test

5.15 Recovering data (PIP)

Description Import function of exported parameters.
Requirement
Overview
Recovering data
Exit selection Press the "STEP" button.

5.16 Configuration settings (Con)

Description Adaptation of configuration.
Overview
Selecting parameters
Changing the setting
Saving the setting
Exit selection
Overview of changeable
configurations
30
USB flash drive is in the USB interface.
The unit's parameter data are on the USB stick.
USb
PIP
Press the "START STOP" button.
Left display shows "USb".
The right display shows "---" continuously.
• The right display shows " End " after complete transmission.
The right display shows " no " when neither USB stick nor
•
parameter data were detected.
0 Con
Turn the left rotary knob.
The left display flashes the first number of the configuration,
refer to the list of configurations.
The right display indicates the corresponding value.
Press the "START STOP" button.
Turn the right knob.
Select a new value.
Press the "START STOP" button.
The left display flashes the selected parameter.
Press and hold the "STEP" button for 3 seconds.
Changes are saved.
The centre display shows "Stor".
Automatic restart of the software.
Press the "STEP" button.
Service instructions
---
6as