Henny Penny FlexFusion FGE 615 Service Instructions Manual page 28

Service menu - unit test
No. Basic setting
16 Cooking chamber 1
temperature offset (upper
sensor on 20.x pedestal units)
17 Cooking chamber 2
temperature offset (lower
sensor on 20.x pedestal units)
18 Sous vide temperature offset
21 Internal core temperature
offset, sensor 1
22 Internal core temperature
offset, sensor 2
23 Internal core temperature
offset, sensor 3
24 Internal core temperature
offset, sensor 4
25 External core temperature
offset, sensor 1
26 External core temperature
offset, sensor 2
27 External core temperature
offset, sensor 3
28 External core temperature
offset, sensor 4
30- Gas blower speed offset
32
33 Volume signal
34 Volume display
35 Display of units of measure
37 Maximum wait time after
reaching the Ready2Cook
temperature < 250 °C
38 Maximum wait time after
reaching the Ready2Cook
temperature > 250 °C
41 Gas type setting
42 Power optimization system
setting
45 Generator mode
28
Standard Range of
value adjustment
9.9 - +9.9°K
9.9 - +9.9°K
9.9 - +9.9°K
9.9 - +9.9°K
9.9 - +9.9°K
9.9 - +9.9°K
9.9 - +9.9°K
9.9 - +9.9°K
9.9 - +9.9°K
9.9 - +9.9°K
9.9 - +9.9°K
30-32
33 0
34 0
35 0
37 120 min.
38 30 min.
0 0 / 1
0 0 / 1
0 0 = Off
1 = On
Service instructions
Explanation
Ability to retrieve the saved temperature
offset values. The can also be changed and
saved. The calibration function in the
Service menu is used for calibration!
Do NOT change these values!
Switching the signal between normal and
loud.
• Selection of volume display.
0 = mL.
1 = fl. oz.
• Selection of units of measure display.
0 = US customary
1 = Imperial
• Ready2Cook stops automatically after the
wait time elapses.
• Switching the software to city gas.
0 = Natural gas / liquefied gas
1 = City gas
• Register interface with software.
0 = Unregistered
1 = Registered
• Only when using generators on ships.