Software Display (Sof) - Henny Penny FlexFusion FGE 615 Service Instructions Manual

Exit menu item
Service menu overview
Designation
Sof Software display
bdS Buttons and display test
rEL
CLt WaveClean test
CO2 CO
H2O DynaSteam test
CAL 100°C calibration
-H2
EEP Export error memory
ECL Delete the error memory
HCL Delete the HACCP memory
SFL Software update
dIA Display the error memory
Con Configuration area
PEP Export I/O parameters
PIP Import I/O parameters

5.2 Software display (Sof)

Description Query about installed software versions.
Overview
Display Software version
Exit selection
Press the "STEP" button.
Description
Displays the installed software
Individual testing of buttons, dials and displays
Relay test Individual control of the relays on the I/O board. Check of the
connected actuators as well as relays.
Option. Test program for automatic cleaning.
– calibration Only for gas version. See CO
2
Functional test of the DynaSteam steaming unit
Calibration function for cooking chamber and core temperature sensor
Drain the water Water draining by means of the connected compressed air on both
water connections.
Export error memory to USB stick
Delete the entire error memory
Delete the entire HACCP memory
Software update via USB
Display the fault messages from error memory
Internal configuration level
Export I/O parameters from USB stick
Import I/O parameters from USB stick
1
Press the "START STOP" button.
Display on the left shows the software version of the unit.
Display on the right shows the software version of the control
board.
Press the "STEP" button.
Service instructions
2
SOF 1
Service menu - unit test
Function
– calibration
13