MultiTrode MultiSmart Installation & Operation Manual page 3

MultiSmart Installation & Operation Manual
This manual is used for v3.1.0 of the MultiSmart Pump Station Manager
This document is proprietary to MultiTrode Pty Ltd (the company) and for sole use within the
company notwithstanding that this document may from time to time be made available to the
company's subcontractors, suppliers, customers and others for purposes associated with
manufacturing and other processes as authorised on an individual basis by MultiTrode Pty Ltd
or their representative.
parties, its contents shall not be transcribed, copied, relayed, or divulged to any other party
whatsoever and after satisfying the requirements for which the document was originally issued
to any external party shall be either returned to the company, or destroyed as required by the
company's document control procedure and as attested to by the recipient at the time of taking
possession of the document. MultiTrode Pty Ltd shall not be held liable in any way whatsoever
for any act or omission, either direct or consequential, arising from the use of the information
contained herein.
MULTITRODE is a registered trade mark of MultiTrode Pty Ltd in Australia and many countries worldwide. PUMPVIEW and MULTISMART
are trademarks of MultiTrode Pty Ltd and pending Australian trade mark registration. Australian Design Registration is pending for the
MultiSmart Pump Station Manager and RTU Remote and Base Modules. Patent Pending in Australia. © 2012 MultiTrode Pty Ltd. This
publication is protected by copyright. No part of this publication may be reproduced by any process, electronic or otherwise, without the
express written permission of MultiTrode Pty Limited.
MultiSmart_IO_Manual_R20
This Manual is the support documentation for the
installation, commissioning and operation of the
MultiTrode MultiSmart Pump Station Manager/RTU
and Reservoir Monitor.
Revision 20
15 May 2013
NOTICE
In such cases where the document has been issued to external
Page 3 of 260