Sms Server - MultiTrode MultiSmart Installation & Operation Manual

26 SMS Server

MultiSmart has SMS Server functionality for sending SMS messages whenever configured alarm conditions
are triggered. SMS server uses PPP Manager 2 to send the SMS.
NOTE: This is an optional feature that must be purchased with the MultiSmart, or enabled later on the
MultiSmart before it can be used. PPP Manager 2 must also be enabled for this functionality to work.
Refer to section 29.2 for enabling the modules.
SMS Server configuration can be set up at:
Figure 167 – SMS Server Settings
For general SMS Server settings, press General Settings.
The following details can be configured in general settings:
•
Station Name
•
Number of SMS retries
•
Wait period for an SMS acknowledgement
Page 222 of 260
MultiSmart Installation & Operation Manual
MultiSmart_IO_Manual_R20