Related Manuals for AudioCodes MP-5 Series
Summary of Contents for AudioCodes MP-5 Series
- Page 1 MediaPack 5xx Voice Gateway Ba sic Configuration Ver. 7.2 Configuration Guide AudioCodes MediaPack™ 5xx Analog Voice Gateway Series Basic Configuration of MP-5xx Analog VoIP Gateways Version 7.2...
-
Page 3: Table Of Contents
MediaPack 5xx Voice Gateway Basic Configuration Ver. 7.2 ..........1 Notice ..........................ii WEEE EU Directive ..........................ii Customer Support..........................ii Stay in the Loop with AudioCodes ....................ii Abbreviations and Terminology ....................... ii Important Notes ..........................ii Related Documentation ........................ii Document Revision Record ...................... -
Page 4: Notice
Customer Support Customer technical support and services are provided by AudioCodes or by an authorized AudioCodes Service Partner. For more information on how to buy technical support for AudioCodes products and for contact information, please visit our website at https://www.audiocodes.com/services-support/maintenance-and-support. -
Page 5: Document Revision Record
31638 Product name change. Documentation Feedback AudioCodes continually strives to produce high quality documentation. If you have any comments (suggestions or errors) regarding this document, please fill out the Documentation Feedback form on our website at https://online.audiocodes.com/documentation-feedback. - iii -... -
Page 6: Introduction
1. Introduction MP-5xx Analog VoIP Gateway Introduction Welcome to AudioCodes MediaPack 5xx (MP-5xx) analog voice gateway series (hereafter, referred to as device). Getting Started with Initial Connectivity This section describes how to initially access the device's management interface. Accessing Device's Management Interface This section describes initial access to the device's management interface. -
Page 7: Accessing Device Through Default Lan Ip Address
2. Getting Started with Initial Connectivity MP-5xx Analog VoIP Gateway 2.1.2 Accessing Device through Default LAN IP Address The following procedure describes how to initially access the device using the default LAN interface. To access the device using the default LAN IP address: Connect the LAN Port directly to your computer's network interface using a straight- through Ethernet cable: Make sure that your computer is configured to automatically obtain an IP address. -
Page 8: Configuring Wan Interface For Voice Gateway
2. Getting Started with Initial Connectivity MP-5xx Analog VoIP Gateway In the 'Username' and 'Password' fields, enter the case-sensitive, default login username (Admin) and password (Admin). Click Log In. Configuring WAN Interface for Voice Gateway This section describes how to configure the device's WAN interface using Gigabit Ethernet 0/0), which is the main interface for connecting the device to the voice GigabitEthernet network. -
Page 9: Enabling Remote Web-Based Management From Wan
3. Voice Gateway using Proxy Server MP-5xx Analog VoIP Gateway Enabling Remote Web-based Management from WAN After you have accessed the device through the LAN interface for initial setup, you can enable Web management access from the WAN interface. To enable remote Web-based management (HTTP/S) from WAN: Open the WEB Settings page (Setup menu >... -
Page 10: Voice Configuration
3. Voice Gateway using Proxy Server MP-5xx Analog VoIP Gateway Voice Configuration This section describes voice configuration on the Voice Gateway. 3.2.1 Configuring Proxy Server Address This section describes how to configure a SIP proxy server address (IP address or hostname). To configure proxy server address: Open the Proxy Sets page (Setup menu >... -
Page 11: Configuring Fxs Ports (Trunk Groups)
3. Voice Gateway using Proxy Server MP-5xx Analog VoIP Gateway 3.2.2 Configuring FXS Ports (Trunk Groups) This section describes how to configure (enable) the FXS ports used by the Voice Gateway. To configure FXS ports (Trunk Groups): ◼ Open the Trunk Groups page (Setup menu > Signaling & Media tab > Gateway folder > Trunks &... -
Page 12: Configuring Fxs Authentication
3. Voice Gateway using Proxy Server MP-5xx Analog VoIP Gateway 3.2.4 Configuring FXS Authentication This section describes how to configure authentication (username and password) for the FXS endpoints. To configure FXS Authentication: ◼ Open the Authentication page (Setup menu > Signaling & Media tab > Gateway folder > Analog Gateway folder >... -
Page 13: Configuring Ip-To-Tel Routing
3. Voice Gateway using Proxy Server MP-5xx Analog VoIP Gateway 3.2.6 Configuring IP-to-Tel Routing This section describes how to configure IP-to-Tel call routing rules. To configure IP-to-Tel routing: ◼ Open the IP -> Tel Routing page (Setup menu > Signaling & Media tab > Gateway folder > Routing folder >... - Page 14 Website: https://www.audiocodes.com ©2023 AudioCodes Ltd. All rights reserved. AudioCodes, AC, HD VoIP, HD VoIP Sounds Better, IPmedia, Mediant, MediaPack, What’s Inside Matters, OSN, SmartTAP, User Management Pack, VMAS, VoIPerfect, VoIPerfectHD, Your Gateway To VoIP, 3GX, VocaNom, AudioCodes One Voice, AudioCodes Meeting Insights, and AudioCodes Room Experience are trademarks or registered trademarks of AudioCodes Limited.