AudioCodes mediapack MP-500 User Manual page 179

SIP User's Manual
Parameter
Destination SRD ID
[IP2IPRouting_DestSRDID]
Destination Address
[IP2IPRouting_DestAddress]
Destination Port
[IP2IPRouting_DestPort]
Destination Transport Type
[IP2IPRouting_DestTransportType]
Alternative Route Options
[IP2IPRouting_AltRouteOptions]
Version 5.8
define an IP Group but only an SRD, then the first IP Group
associated with this SRD (in the 'IP Group' table) is used.
Determines the SRD ID.
The default is -1.
Note: The destination IP Group must belong to the
destination SRD, if both are configured in this table.
The destination IP address (or domain name, e.g.,
domain.com) to where the call is sent.
Notes:
This parameter is applicable only if the parameter
'Destination Type' is set to 'Dest Address' [1].
When using domain names, enter a DNS server IP
address or alternatively, define these names in the
'Internal DNS Table' (refer to ''Configuring the Internal
SRV Table'' on page 209).
The destination port to where the call is sent.
The transport layer type for sending the call:
[-1] Not Configured (default)
[0] UDP
[1] TCP
[2] TLS
Note: When this parameter is set to -1, the transport type is
determined by the parameter SIPTransportType.
This parameter is not applicable to SAS.
179
3. Web-Based Management
Description
October 2009